Fire Damage Restoration Service

“Fire damage restoration service can be devastating, and restoring property after a fire can seem impossible. In the United States, a fire department responds to a fire every 24 seconds, according to the National Fire Protection Association. The direct property damage caused by fires is estimated to exceed $25.5 billion annually.”


Fire Damage Restoration Service


However, even after the fire is out, the fire department…Restoration professionals must restore homes and businesses to their pre-loss state. Fire damage restoration services are restoring fire and smoke-damaged property to its original condition.

Fire cleanup and restoration often take weeks or even months due to the destruction caused by the fire. Water damage restoration involves removing water from the property and drying it out, a task usually completed in a few days.


What Is Fire Restoration?

Let’s get started with the fundamentals. Restoring fire damage is fixing property damaged by smoke or fire. It aims to return the property to its pre-loss condition. Depending on the fire’s severity and the damage caused, the restoration process could take anywhere from a couple of weeks to a few months to finish.

In addition to debris removal, odour elimination, soot elimination, cleaning, and deodorization are also needed. Reconstruction after fire could also include property board-up demolition and full reconstruction.

It’s also important to remember that water damage is often a result of fire damage. A home will likely suffer water damage when firefighters put out the flames.


Tasks during the Fire Damage Restoration

During fire damage restoration, tasks may include boarding up property, demolition, and reconstruction. They also include removing debris, soot, and odor. Other tasks include cleaning the contents and removing disturbed hazards like lead and asbestos.

It’s also important to note that fire and water damage can co-occur. Firefighters first soak the property with water while working to control and put out the fire. A fire in the structure may cause significant damage, but sometimes, its pipes break or melt. Water may leak into the structure during a fire, causing considerable damage.

Water damage can similarly render a structure unsalvageable. After securing the property, the first step is to remove any remaining water. This must happen before the water causes more damage. Take a closer look at the process of restoring fire damage.

After we’ve explained the basics of fire restoration, let’s take an in-depth look at each stage of the fire restoration process and its significance.


Process of Fire Restoration

Fire restoration can take weeks or months. It usually takes more steps than disaster restorations, such as water damage restoration. There may be boards up on the property, demolition of specific structures, and reconstruction of others during the process.

In general, fire and water damage can co-occur. Fires can damage structures a lot, whether caused by humans or natural disasters. Firefighters will use water and other methods to extinguish the fire, which can further damage the structure.

The professionals at a fire restoration company know the harm of putting out a fire. So, they take all needed measures to restore the structure to its pre-fire state.


Who Performs Fire Restoration Service?

Typically, these professionals arrive within hours of the person making the call after a fire. Numerous companies specialize in restoring structures. You can start the restoration process when you board the property for protection. Someone puts a tarp on the roof and assesses the damage.

Many of these pros have certifications in fire and smoke damage restoration. The professionals of fire damage restoration services know how fires damage a structure and how to fix and restore the building after a fire.

These technicians can clean and deodorize. They can also reduce risks, scoop, and even document the restoration.


Fire Damage Restoration Steps

A contractor needs the go-ahead from a licensed authority to assess the fire damage on your property. It could be unsafe for a contractor to enter a dangerous situation and risk injury.

Here’s how the fire damage restoration process goes from there once they have access to the property:


Damage assessment

A fire damage restoration services contractor must assess the damage from the fire and water soon. As soon as we confirm the property is safe for entry. The first step will be to see how deep the flames and smoke got into the building. We’ll also see how much cleanup we will likely need.

During this step, we also analyze the property’s contents to decide what to remove, pack, and restore. An assessment will help the restoration company determine the work’s scope, the project’s duration, and the cost.


Property security & debris removal

This includes installing fencing around the property and removing debris from the perimeter. Someone boarded up the openings. To keep the property dry, we tarp or seal the roof. Restoration pros must seal off parts of the property that are not impacted by the fire to stop cross-contamination from the affected areas.


Removal of water, demolition, and drying

During this stage, you will remove water from your property and dry it out to prevent further mold or corrosion damage. In addition to removing damaged drywall, flooring, and other materials down to the studs, water extraction crews will utilize commercial equipment to dry out the structure.

Personal property must be removed from the interior of the building. During this stage, the roof tarps must be kept up to prevent more water from getting in.


Smoke cleanup & removal.

Cleaning up is one of the most labor-intensive steps of fire damage restoration. In many cases, a thorough cleaning is necessary. Deodorizing agents eliminate any lingering smoke odors after proper cleaning.

Sanitizing or applying antimicrobial chemicals may be required after water damage restoration to prevent mold growth. In addition to packing out contents, cleanup includes cleaning the ducts to remove soot, smoke, and debris that may have settled in them.

Items that leave the premises will likely undergo restoration off-site. They will restore them to their pre-loss condition.


Restoration and Construction

Any fire damage repairs or rebuilding of fire-damaged areas should take place to restore the property to its pre-loss condition. During the initial assessment following a fire, we may find some parts of the structure are not salvageable, so we must remove and replace them.

Rebuilding the roof and replacing the electrical system, replacing and painting drywall, replacing flooring materials, and replacing interior counters, fixtures, etc., are all possible ways to restore a property to its pre-loss condition.


Costs of Fire Damage Restoration Service by Type

Restoring fire damage addresses many problems at once. It may be necessary to dry the water used to extinguish the fire, repair damage to HVAC ducts and vents, deodorize fabrics contaminated with smoke odor, and remove items beyond repair after restoration specialists have dried the water. The cost of each task varies.


Costs of Fire Damage Restoration Service by Type


Smoke Damage

Remediating smoke residue and toxic odors from absorbent surfaces like upholstery, carpeting, and walls costs between $200 and $900.


Having water damage

You will likely find yourself with soaked walls, floors, furniture, carpets, ceilings, cabinets, electronics, and more after extinguishing a large house fire with sprinklers or hoses. Getting water out of your home as soon as possible prevents mold growth. Cleaning water damage involves water removal, dehumidification, and deodorization, which costs $1,000 to $4,600.


Removal of soot

Leaving soot behind after a fire can cause permanent stains and severe health hazards because it gets stuck in the crevices of walls, floors, and furniture.

The longer it sits, the more expensive it becomes to remove. In general, soot remediation costs between $1,400 and $4,700, with grease and kitchen fire soot resulting in higher costs.


Removal of damaged items

It costs money to remove and dispose of burned materials from your home. Complete this before making repairs. Generally, contractors charge $55 to $80 per pound of material, although some charge a flat fee.


Furniture deodorization

Even salvageable furniture after a fire may emit toxic smoke fumes that are toxic to inhale. Odor removal typically costs between $600 and $2,000.

To eliminate odors, whole-house purifying treatments break down odor-causing compounds.


Cleaning of ducts

It is usual for soot and smoke to get trapped in ductwork. If not removed, these odors circulate throughout the home, negatively impacting indoor air quality. After a fire, it can cost up to $500 to clean your air ducts, drip pans, registers, fans, and HVAC motor.


Treatment with ozone

A high-tech deodorizing method that costs $200 to $500 per floor uses ozone to break down odor molecules in the air on surfaces, delivering high oxygen levels.


Thermo fogging

It involves spraying heated chemical agents across fabrics and surfaces, permanently lifting smoke particles, and neutralizing lingering odors in hard-to-reach areas. Thermal fogging costs between $200 and $600 per floor.


Homeowners Insurance Covers Fire Damage Restoration.

You can usually get coverage for fire damage cleanup through your homeowner’s insurance policy. The total value of your policy, including the services and amount of damage covered, depends on the specific terms of your policy.

  • In the case of fire damage or destruction, the “face value” coverage will compensate you for the original value of the damaged or destroyed items.
  • Repairs or restorations of salvageable damaged goods or parts of your home

Your insurance company can make a significant impact on your out-of-pocket costs. Call your company immediately after a fire to file a claim and avoid delays.

Most providers need to approve remediation services before beginning house fire damage repair. They will also approve any contractors who work on your home to verify licensing and permits.


FAQs: Fire Damage Restoration Service


Regarding fire damage, are there any standard practices that restorers follow?

The Institute for Inspection, Cleaning, and Restoration Certification (IICRC) sets the S740 Standard for Professional Restoration of Fire and Smoke Damaged Personal Items. According to this standard, almost every property damaged by fire or smoke returns to pre-loss condition.


How long will it take for your home to recover after a fire?

Once we correctly assess the fire damage, we can answer this question. If only a portion of the property was damaged, some homeowners may be able to live in areas not affected by fire damage. Residents may not be able to return to the property until it is safe to occupy once again if there is widespread damage or the home is a total loss.


Could you please restore the contents of my belongings?

We can restore things like rugs, furnitnics, machinery, etc. if they have hardened, smoke, or water damage. Today’s advancements in contents cleaning technologies are primarily responsible for this, as ultrasonic, dry, hand, and electronic cleaning equipment provide significant benefits for restoring hard and soft goods. When items in flames become packed out, people often must discard them.


What are some of the most common tools contractors use for fire restoration?

Restoration jobs involving fire damage involve a lot of hand cleaning, as every inch of the affected surface needs to be cleaned properly. Cleaning equipment, in addition to chemicals and sponges, can help get the job done.

This equipment may include a deodorizer, an air cleaner, a HEPA vacuum, fans, air movers, and a dehumidifier. Carpet extractors, moisture meters, and thermal imaging cameras can also treat water damage.


Are there any hazards on my fire-damaged property?

While it is common for fire and water damage to co-occur, a fire damage situation can reveal several otherwise hidden hazards. When disturbed, building materials containing asbestos, for example, could break and release asbestos fibers.

If asbestos exists on a property, it must be remedied before it can be restored to pre-loss condition. Restoration contractors may also encounter lead exposure from lead-based paints and mold growth from water damage.


The Best Way to Select a Fire Damage Restoration Service

When a disaster strikes, choosing a service to clean up and restore your property is crucial. Many aspects of construction are involved in these complex projects, including removing damage, wiring, plumbing, roofing, remodeling, and building from scratch, assisting with insurance claims, and managing complex projects.


You should look for a fire damage restoration service that has the following qualifications:

  • Insured, licensed, and bonded
  • Coordination experience with multiple parties on complex projects
  • Demolition and installation experience managing staged restoration projects
  • Water damage, fire damage, and mold damage repairs and restoration experience
  • Working experience with insurance companies

With the help of experienced fire restoration services, your property can be restored as if it had never suffered from fire.